TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1224 of 1318

TM 9-2320-328-13&P-1

0108-6

DRAFT

0108

Change 1

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3270

.

WARNING

.

ICON 3

.

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

.

Step 6.

Remove skid plate grille (WP 0349).

Disconnect main wire harness main 2 connector.

With a test lead set, check for continuity across main wire harness wire 1696 (black)

from main wire harness main 2 connector, terminal X to main wire harness driver side

body wire harness connector, terminal K.

.

a.

If there is continuity, repair wire 1696 in cab instrument panel wire

harness if repairable (TM 9-2320-325-14&P), or replace cab instrument

panel wire harness (WP 0279).

.

b.

If there is no continuity, repair wire 1696 in main wire harness if

repairable (TM 9-2320-325-14&P), or replace main wire

harness (WP 0292).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION