TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1228 of 1318

TM 9-2320-328-13&P-1

0108-10

DRAFT

0108

Change 1

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3271

.

Step 11.

Remove driver side rear light bezel cover (WP 0335).

Disconnect driver side body wire

harness 4-pin connector.

With a test lead set, check for continuity across wire 2640

from driver side wire harness driver side 4-pin connector, terminal 2 to a known good

ground.

.

a.

If there is continuity, repair wire 2640 in upper driver side body wire

harness if repairable (TM 9-2320-325-14&P), or replace driver side

body wire harness (WP 0286).

.

b.

If there is no continuity, repair wire 2640 in lower driver side body wire

harness if repairable (TM 9-2320-325-14&P), or replace driver side

body wire harness (WP 0286).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION