TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1226 of 1318

TM 9-2320-328-13&P-1

0108-8

DRAFT

0108

Change 1

.

HWT118A4

.

Step 8.

Put DRIVER SCENE switch to off position (WP 0004).

Turn Service Drive Lights

Off (TM 9-2320-422-10).

Pull battery disconnect switch to off position (WP 0007).

With

a test lead set, check for continuity across wire 2640 (black) from driver side body wire

harness rear driver side scene light connector, terminal B to a known good ground.

.

a.

If there is no continuity, repair wire 2640 in lower driver side body wire

harness if repairable (TM 9-2320-325-14&P), or replace driver side

body wire harness (WP 0286).

.

b.

If there is continuity, replace non-operating driver side scene light

assembly (WP 0233).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION