TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 465 of 1318

TM 9-2320-328-13&P-1

0062-7

DRAFT

0062

Change 1

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

HWT3212

WARNING

ICON 3

..

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry and tools may short across electrical circuits and cause damage to

equipment, or severe burns or electrical shock to personnel.

..

Step 12.

Pull battery disconnect switch to off position (WP 0007).

Reconnect passenger side

body wire harness 12-pin connector.

Disconnect main wire harness passenger side

body wire harness connector.

Push battery disconnect switch to on position

(WP 0007).

With a test set, check for 4 to 6 VDC between wire 3850 (green) at main

wire harness passenger side body wire harness connector, terminal 11 to a known

good ground.

..

If 4 to 6 VDC are present, repair wire 3850 in lower passenger side body

wire harness if repairable TM 9-2320-325-14&P, or replace passenger side

body wire harness (WP 0298).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION