TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 470 of 1318

TM 9-2320-328-13&P-1

0062-12

DRAFT

0062

Change 1

HWT3103

..

Step 17.

Pull battery disconnect switch to off position (WP 0007).

Remove cab instrument

panel B (WP 0205).

Disconnect cab pump control wire harness foam level gauge

connector from cab FOAM A level gauge.

Disconnect cab pump control wire harness

water level gauge connector from cab WATER level gauge.

Connect cab pump

control wire harness foam level gauge connector to cab WATER level gauge.

Push

battery disconnect switch to on position (WP 0007).

Check if cab WATER level gauge

1/4 and 3/4 LEDs flash alternately.

..

If cab WATER level gauge 1/4 and 3/4 LEDs do not flash alternately,

replace cab FOAM A level gauge (WP 0200).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION