TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 471 of 1318

TM 9-2320-328-13&P-1

0062-13

DRAFT

0062

Change 1

HWT3104

..

Step 18.

Pull battery disconnect switch to off position.

Reconnect cab pump control wire

harness level gauge connectors to original position.

Open pump operator’s panel

(WP 0207). Disconnect pump operator’s panel wire harness foam level gauge

connector from pump operator’s panel FOAM A level gauge.

Disconnect pump

operator’s panel wire harness water level gauge connector from pump operator’s

panel WATER gauge.

Connect pump operator’s panel wire harness foam level gauge

connector to pump operator’s panel WATER level gauge. Push battery disconnect

switch to on position (WP 0007). Check if cab FOAM A level gauge 1/4 and 3/4 LED’S

flash alternately.

..

If cab FOAM A level gauge 1/4 and 3/4 LEDs do not flash alternately,

replace pump operator’s panel FOAM A level gauge (WP 0211).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION