TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 732 of 1318

TM 9-2320-328-13&P-1

0072-68

DRAFT

0072

Change 1

..

HWT2670

..

Step 81.

Turn engine off (TM 9-2320-422-10).

Pull battery disconnect switch to off position

(WP 0007).

Remove pump house panel K (WP 0339).

Disconnect pump house wire

harness intake pressure transducer connector.

Push battery disconnect switch to on

position (WP 0007).

Check if pressure governor control displays caution fault, Intake

Pressure Transducer Failure with an Open Circuit (WP 0017).

..

If pressure governor control displays caution fault, Intake Pressure

Transducer Failure with an Open Circuit, replace intake pressure transducer

(WP 0265).

..

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION