TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 726 of 1318

TM 9-2320-328-13&P-1

0072-62

DRAFT

0072

Change 1

..

HWT2649

..

Step 72.

Turn ENGINE switch to OFF position (TM 9-2320-422-10).

Pull battery disconnect

switch to off position (WP 0007).

Remove pump house panel K (WP 0339).

Disconnect

pump house wire harness intake vacuum transducer connector.

Push battery

disconnect switch to on position (WP 0007).

Check if pressure governor control

displays caution fault, Intake Vacuum Transducer Failure with an Open Circuit.

..

If pressure governor control displays caution fault, Intake Vacuum

Transducer Failure with an Open Circuit, replace intake vacuum transducer

(WP 0265).

..

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION