TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 733 of 1318

TM 9-2320-328-13&P-1

0072-69

DRAFT

0072

Change 1

..

HWT2697

..

Step 82.

Pull battery disconnect switch to off position (WP 0007).

Disconnect pump house wire

harness intake pressure transducer connector.

Disconnect pump house wire harness

pressure governor ECU J1 connector.

With a test lead set, check for continuity across

pump house wire harness wire 3292 (gray) from pump house wire harness intake

pressure transducer connector, terminal A to a known good ground.

..

If there is continuity, repair wire 3292 in pump house wire harness if

repairable (TM 9-2320-325-14&P), or replace pump house wire

harness (WP 0302).

..

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION