TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 785 of 1318

TM 9-2320-328-13&P-1

0072.1-3/(4 blank)

DRAFT

0072.1

Change 1

END OF TASK

FOLLOW-ON MAINTENANCE

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

HWT3381

Step 3.

Disconnect pump house wire harness pressure governor transorb module connector

from pressure governor transorb module (WP 0302).

Remove pump house wire

harness wire 1100 (black) from pressure governor ECU bracket (WP 0302).

With a test

lead set, check for continuity across pump house wire harness wire 1100 (black) from

pump house wire harness pressure governor transorb module connector, terminal C to

pump house wire harness wire 1100 terminal connector.

a.

If there is continuity, replace pressure governor transorb module

(WP 0302).

b.

If there is no continuity, repair wire 1100 in pump house wire harness if

repairable (TM 9-2320-325-14&P), or replace pump house wire

harness (WP 0302).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION