TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 791 of 1318

TM 9-2320-328-13&P-1

0073-5

DRAFT

0073

HWT0973A

Step 9.

Remove skid plate grille (WP 0349).

Disconnect main wire harness pump operator’s

panel 11-pin wire harness connector.

Disconnect main wire harness main 3 connector.

With a test lead set, check for continuity across main wire harness wire 2773 (red), from

main wire harness main 3 connector, terminal D to main wire harness pump operator’s

panel 11-pin wire harness connector, terminal P.

If there is no continuity, repair wire 2773 in main wire harness if repairable

(TM 9-2320-325-14&P), or replace main wire harness (WP 0292).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION