TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 800 of 1318

TM 9-2320-328-13&P-1

0073-14

DRAFT

0073

HWT0980A

Step 19.

Reconnect main wire harness pump operator’s panel 11-pin wire harness connector.

With a test lead set, check for continuity across pump operator’s panel wire harness

wire 1590 (red) from main wire harness main 3 connector, terminal F, to pump

operator’s panel wire harness diode pack connector, terminal B.

a.

If there is continuity, repair wire 1590 in cab pump control wire harness

if repairable (TM 9-2320-325-14&P), or replace cab pump control wire

harness (WP 0281).

b.

If there is no continuity, repair wire 1590 in pump operator’s panel wire

harness if repairable (TM 9-2320-325-14&P), or replace pump

operator’s panel wire harness (WP 0303).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION