TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 801 of 1318

TM 9-2320-328-13&P-1

0073-15

DRAFT

0073

HWT0981

WARNING

ICON 3, 25

•

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

•

Do not smoke, use open flame, make sparks or other ignition sources around

batteries.

A battery giving off gas could explode and cause injury to personnel.

Step 20.

Pull battery disconnect switch to off position (WP 0007).

Disconnect vehicle’s negative

battery terminals (TM 9-2320-325-14&P).

Check for continuity across pump house high

amperage 2/0 cable from pump house B+ stud to vehicle’s positive battery post.

a.

If there is continuity, replace pump house B+ stud (WP 0301).

b.

If there is no continuity, replace high amperage 2/0 gauge cable

between pump house B+ stud and vehicle’s batteries (WP 0251).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION