TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 799 of 1318

TM 9-2320-328-13&P-1

0073-13

DRAFT

0073

HWT0979A

Step 18.

Pull battery disconnect switch to off position (WP 0007).

Remove skid plate

grille (WP 0349).

Disconnect main wire harness pump operator’s panel 11-pin wire

harness connector.

Disconnect main wire harness main 3 connector.

With a test lead

set, check for continuity across main wire harness wire 1590 (red), from main wire

harness main 3 connector, terminal F, to main wire harness pump operator’s panel 11-

pin wire harness connector, terminal B.

If there is no continuity, repair wire 1590 in main wire harness if repairable

(TM 9-2320-325-14&P), or replace main wire harness (WP 0292).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION