TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1245 of 1390

TM 9-2320-328-13&P-2

0304-1

DRAFT

0304

FIELD LEVEL MAINTENANCE

WATER TANK FILL & RE-CIRCULATING LINE VALVE CONTROL WIRE HARNESS REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Note routing of water tank fill & re-circulating line valve control wire harness prior to

removal to ensure proper installation.

•

Water tank fill & re-circulating line valve control wire harness is routed through pump

house panel N and pump operator’s panel assembly.

•

Remove split loom, cushion clips, and cable ties as required.

•

Tag and mark connectors prior to removal to ensure proper installation.

1.

Disconnect water tank fill & re-circulating line valve control wire harness connector (1) from water tank

fill & re-circulating line valve control connector (2).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT1936

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification, (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

References

WP 0391, Fig. 49, 54, 55

Equipment Conditions

Pump operator’s panel opened (WP 0207)

Pump house panels E and G removed (WP 0339)