TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1246 of 1390

TM 9-2320-328-13&P-2

0304-2

DRAFT

0304

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- 0

2.

Disconnect water tank fill & re-circulating line valve control wire harness connector (3) from water tank

fill & re-circulating line connector (4).

3.

Remove water tank fill & re-circulating line valve control wire harness (5) from vehicle.

END OF TASK

INSTALLATION

NOTE

•

Route water tank fill & re-circulating line valve control wire harness as noted.

•

Install cable ties, split loom, and cushion clips as required.

1.

Install water tank fill & re-circulating line valve control wire harness (5) on vehicle.

2.

Connect water tank fill & re-circulating line valve control wire harness connector (3) to water tank

fill & re-circulating line connector (4).

HWT1937