TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1274 of 1390

TM 9-2320-328-13&P-2

0308-2

DRAFT

0308

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Fuel is very flammable and can explode easily.

To avoid serious injury or death,

keep fuel away from open fire and keep fire extinguisher within easy reach when

working with fuel.

Do not work on fuel system when engine is hot.

Fuel can be

ignited by hot engine. When working with fuel, post signs that read NO SMOKING

WITHIN 50 FEET of vehicle.

NOTE

•

Fuel may spill when clamps and hoses are removed.

•

Position suitable drain pan under hoses to catch excess fuel.

2.

Remove clamp (4) and hose (5) from heater fuel pump (3).

3.

Remove clamp (6) and hose (7) from heater fuel pump (3).

4.

Remove locknut (8), washer (9), screw (10), clamp (11), and heater fuel pump (3) from vehicle.

Discard

locknut.

5.

Remove pump (3) from clamp (11).

END OF TASK

INSTALLATION

1.

Position clamp (11) on heater fuel pump (3).

2.

Install clamp (11) and heater fuel pump (3) on vehicle with screw (10) and washer (9) and locknut (8).

3.

Install hose (7) on heater fuel pump (3) with clamp (6).

4.

Install hose (5) on heater fuel pump (3) with clamp (4).

HWT0251

WARNING

ICON 30,25