TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1266 of 1390

TM 9-2320-328-13&P-2

0307-2

DRAFT

0307

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2.

Remove nut (5) and heater diagnostic switch (4) from heater diagnostic switch box (6).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Perform Steps (3) through (9) if thermostatic switch must be removed.

3.

Remove locknut (7), wire 4088 (8), wire 4086 (9), and wire 2852 (10) from isolator (11).

Discard locknut.

4.

Remove screw (12), lockwasher (13), two wires 2852 (2) from isolator (11).

Discard lockwasher.

HWT1734

HWT1737