TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1261 of 1390

TM 9-2320-328-13&P-2

0306-1

DRAFT

0306

FIELD LEVEL MAINTENANCE

PUMP HOUSE HEATER TEST SWITCH REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

•

Tag and mark wires prior to removal to ensure proper installation.

•

Remove cable ties as required.

1.

Remove two screws (1), black wire (2), and red wire (3) from pump house heater test switch (4).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2570

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

References

WP 0391, Fig. 63

Equipment Conditions

Pump house panel E removed (WP 0339)

Pump house access door assembly opened

(WP 0009)