TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 192 of 1390

TM 9-2320-328-13&P-2

0123-10

DRAFT

0123

Change 1

END OF TASK

FOLLOW-ON MAINTENANCE

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

.

HWT0392

.

Step 12.

Pull battery disconnect switch to off position (WP 0007).

Remove cab instrument panel

D (WP 0205).

Disconnect rear step buzzer audio alarm connector.

With a test lead set,

check for continuity across cab power distribution wire harness wire 1647 (brown) from

rear step buzzer audio alarm connector, terminal B to rear step buzzer indicator

terminal.

.

If there is no continuity, repair wire 1647 in cab distribution wire harness if

repairable (TM 9-2320-325-14&P), or replace cab power distribution wire

harness and block (WP 0280).

.

Step 13.

With a test lead set, check for continuity across main wire harness wire 1614 (brown)

from rear step buzzer audio alarm connector, terminal A to rear step buzzer indicator

terminal.

.

a.

If there is continuity, replace rear step buzzer indicator (WP 0203).

.

b.

If there is no continuity, repair wire 1614 in main wire harness if

repairable (TM 9-2320-325-14&P), or replace main

harness (WP 0292).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION