TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 182 of 1390

TM 9-2320-328-13&P-2

0122-12

DRAFT

0122

END OF TASK

FOLLOW-ON MAINTENANCE

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

HWT0415

Step 20.

Pull battery disconnect switch to off position (WP 0007).

Remove skid plate

grille (WP 0349).

Disconnect main wire harness main 1 connector.

With a test lead set,

check for continuity across main wire harness wire 2346 (red) from main 1 connector,

terminal 8 to main wire harness pump operator’s panel 11-pin wire harness connector,

terminal D.

a.

If there is continuity, repair wire 2346 in cab power distribution wire

harness if repairable (TM 9-2320-325-14&P), or replace cab power

distribution wire harness and block (WP 0280).

b.

If there is no continuity, repair wire 2346 in main wire harness if

repairable (TM 9-2320-325-14&P), or replace main wire harness

(WP 0292).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION