TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 176 of 1390

TM 9-2320-328-13&P-2

0122-6

DRAFT

0122

HWT1537

WARNING

ICON 3

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

Step 11.

Put pump operator’s panel PANEL LIGHTS switch to off position (WP 0004).

Pull

battery disconnect switch to off position (WP 0007).

Disconnect any pump house

striplight connector.

With a lead test set, check for continuity across pump house wire

harness wire 2740 (black) from striplight connector, terminal B to a known good ground.

If there is no continuity, repair wire 2740 in pump house wire harness if

repairable (TM 9-2320-325-14&P), or replace pump house wire

harness (WP 0302).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION