TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 166 of 1390

TM 9-2320-328-13&P-2

0121-14

DRAFT

0121

Change 1

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3329

.

WARNING

.

ICON 3

.

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

.

Step 19.

Turn Service Drive Lights Off (TM 9-2320-422-10).

Pull battery disconnect switch to off

position (WP 0007).

Disconnect passenger side body wire harness 12-pin connector.

Pull battery disconnect switch to on position (WP 0007).

Turn Service Drive Lights

On (TM 9-2320-422-10).

With a test lead set, check for 22 to 28 VDC between wire

1189 from passenger side body wire harness 12-pin connector, terminal 8 to a known

good ground.

.

If 22 to 28 VDC are not, repair wire 1189 in upper passenger side body wire

harness if repairable (TM 9-2320-325-14&P), or replace passenger side

body wire harness (WP 0298).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION