TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 179 of 1390

TM 9-2320-328-13&P-2

0122-9

DRAFT

0122

HWT0412

Step 15.

Put pump operator’s panel PANEL LIGHTS switch to off position (WP 0004).

Pull

battery disconnect switch to off position (WP 0007). Open pump operator’s

panel (WP 0207).

Disconnect pump operator’s panel wire harness striplight connector.

With a test lead set, check for continuity across pump operator’s panel wire harness

wire 3895 (black) from striplight connector terminal B, to a known good ground.

a.

If there is continuity, repair wire 1661 in pump operator’s panel wire

harness if repairable (TM 9-2320-325-14&P), or replace pump

operator’s panel wire harness (WP 0303).

b.

If there is no continuity, repair wire 3895 in pump operator’s panel wire

harness if repairable (TM 9-2320-325-14&P), or replace pump

operator’s panel wire harness (WP 0303).

HWT0697

Step 16.

Pull battery disconnect switch to off position (WP 0007).

Remove cab instrument

panel A (WP 0205).

Remove circuit breaker 6 (WP 0242). Check for continuity across

circuit breaker.

If there is no continuity, replace circuit breaker 6 (WP 0242).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION