TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 197 of 1390
TM 9-2320-328-13&P-2
0124-5/(6 blank)
DRAFT
0124
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-422-10)
END OF TASK
END OF WORK PACKAGE
HWT1700
Step 7.
Press intercom transmit select/receive RADIO B button (WP 0004).
With intercom
headset connected to pump operator’s panel intercom jack (WP 0004), check if
intercom system sends and receives through SINCGARS radio set (WP 0004).
If intercom system sends and receives through SINCGARS radio set, fault
corrected.
Step 8.
Connect handset to SINCGARS receiver transmitter (TM 11-5280-890-10).
Check if
SINCGARS receiver transmitter sends and receives to and from another radio set.
a.
If SINCGARS receiver transmitter sends and receives to and from
another radio set, troubleshoot Intercom and Headsets Does Not
Operate Properly (WP 0120).
b.
If SINCGARS receiver transmitter does not send and receive to and
from another radio set, notify Supervisor.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
