TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 343 of 1390

TM 9-2320-328-13&P-2

0137-5

DRAFT

0137

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Install pump house wire harness (3) through shroud B (4).

4.

Connect two pump house wire harness connectors (1) to heat exchanger fan connectors (2).

END OF TASK

SHROUD C REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

1.

Remove three screws (1), lockwashers (2), and washers (3) from shroud C (4) and vehicle.

Discard

lockwashers.

HWT2019

HWT2022