TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 341 of 1390

TM 9-2320-328-13&P-2

0137-3

DRAFT

0137

SHROUD B REMOVAL

NOTE

Tag and mark wires prior to removal to ensure proper installation.

1.

Disconnect two pump house wire harness connectors (1) from hydraulic heat exchanger fan connectors (2).

NOTE

Note routing of wire harness prior to removal to ensure proper installation.

2.

Remove pump house wire harness (3) from shroud B (4).

NOTE

Note position and orientation of shroud B prior to removal to ensure proper installation.

3.

Remove two screws (5), lockwashers (6), and washers (7) from shroud B (4) and vehicle.

Discard

lockwashers.

HWT2019

HWT2020