TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 595 of 1390

TM 9-2320-328-13&P-2

0188-7

DRAFT

0188

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

7.

Install four guide pins (6) on water tank (5).

8.

With the aid of an assistant, install manual bray dump valve (10) on four guide pins (6) and water tank (5).

9.

Position dump chute (4) on four guide pins (6).

10. Install eight washers (9), lockwashers (8), and screws (7) on dump chute (4) and water tank (5).

Do not

tighten screws.

11. Remove four guide pins (6) from dump chute (4) and water tank (5).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- -

-

-

-

-

-

-

-

-

-

-

HWT3018