TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 592 of 1390

TM 9-2320-328-13&P-2

0188-4

DRAFT

0188

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Perform Steps (9) through (11) for rear hand wheel dump valve removal.

9.

With the aid of an assistant, remove 12 locknuts (17), 24 washers (18), 12 screws (19), dump chute (20), and

rear hand wheel dump valve (21) from adapter (22).

Discard locknuts.

10. Remove two screws (23), lockwashers (24), and washers (25) from adapter (22).

Discard lockwashers.

NOTE

Note position of washers prior to removal to ensure proper installation.

11. With the aid of an assistant, remove 14 locknuts (26), washers (27), washers (28), screws (29), adapter (22),

and gasket (30) from vehicle.

Discard locknuts and gasket.

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3448