TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 590 of 1390

TM 9-2320-328-13&P-2

0188-2

DRAFT

0188

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Dump chute weighs 50 lb (22.7 kg).

Bray valve weighs 55 lb (24.9 kg).

Do not

attempt to lift or move dump chute or bray valve without the aid of an assistant.

Failure to comply may result in injury or death to personnel.

2.

Install four guide pins (6) in dump chute (4) and water tank (5).

3.

Remove eight screws (7), lockwashers (8), and washers (9) from dump chute (4) and water tank (5).

Discard

lockwashers.

4.

Remove dump chute (4) from four guide pins (6) and vehicle.

5.

With the aid of an assistant, remove manual bray dump valve (10) from four guide pins (6) and water tank (5).

6.

Remove four guide pins (6) from water tank (5).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT3018

WARNING

ICON 7