TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 900 of 1390

TM 9-2320-328-13&P-2

0254-2

DRAFT

0254

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Remove nut (12) and wire 1664L (13) from stud (14).

NOTE

Note position of cushion clip prior to removal to ensure proper installation.

5.

Remove two nuts (15), lockwashers (16), four washers (17), cushion clip (18), two screws (19), and

solenoid (20) from bracket (21).

Discard lockwashers.

END OF TASK

INSTALLATION

NOTE

Install cushion clip as noted prior to removal.

1.

Install solenoid (20) and cushion clip (18) on bracket (21) with two screws (19), four washers (17), two

lockwashers (16), and nuts (15).

2.

Install wire 1664L (13) on stud (14) with nut (12).

HWT0286