TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 890 of 1390

TM 9-2320-328-13&P-2

0251-2

DRAFT

0251

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Remove nut (4), washer (5), and high amperage cable (2) from pump house B+ stud (6).

5.

Remove high amperage cable (2) from vehicle.

END OF TASK

INSTALLATION

NOTE

•

Route high amperage cable as noted prior to removal.

•

Install cable ties, split loom, and cushion clips as required.

1.

Install high amperage cable (2) on vehicle.

2.

Install high amperage cable (2) on pump house B+ stud (6) with washer (5) and nut (4).

3.

Close passenger side pump house control access door (WP 0008).

HWT2356