TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 894 of 1390

TM 9-2320-328-13&P-2

0252-2

DRAFT

0252

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Remove two nuts (6), lockwashers (7), four washers (8), two screws (9), and circuit breaker (3) from

bracket (10).

Discard lockwashers.

NOTE

Perform Steps (4) and (5) if bracket needs to be removed.

4.

Remove hose reel solenoid (11) (WP 0254).

5.

Remove two nuts (12), lockwashers (13), four washers (14), screws (15), and bracket (10) from pump house

frame (16).

Discard lockwashers.

END OF TASK

INSTALLATION

NOTE

Perform Steps (1) and (2) if bracket was removed.

1.

Install bracket (10) on pump house frame (16) with two screws (15), fours washers (14), two lockwashers (13),

and nuts (12).

2.

Install hose reel solenoid (11) (WP 0254).

3.

Install circuit breaker (3) on bracket (10) with two screws (9), four washers (8), two lockwashers (7), and

nuts (6).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2362