TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 887 of 1390

TM 9-2320-328-13&P-2

0250-3/(4 blank)

DRAFT

0250

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Alignment pin must align with hole on adapter before tightening nut.

2.

Align alignment pin (7) on flow sensor (4) with hole in adapter (5).

3.

Install flow sensor (4) on adaptor (5) and tighten nut (3).

4.

Connect flow sensor wire harness connector (2) to flow sensor connector (1).

END OF TASK

FOLLOW ON MAINTENANCE

1.

Install pump house access panel G (WP 0339)

2.

Calibrate pump operator’s panel electric valve controller (WP 0210)

END OF TASK

END OF WORK PACKAGE

HWT0559