TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 886 of 1390

TM 9-2320-328-13&P-2

0250-2

DRAFT

0250

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Remove two preformed packings (6) from flow sensor (4).

Discard preformed packings.

END OF TASK

INSTALLATION

NOTE

All flow sensors are installed the same way.

Flow sensor on No. 1 passenger side

discharge valve shown.

1.

Lightly lubricate two preformed packings (6) with lubricating oil and install two preformed packings (6) on flow

sensor (4).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT0770