TM-9-2320-328-13-P-3
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3
MARCH 2009
TM-9-2320-328-13-P-3 - Page 73 of 844
TM 9-2320-328-13&P-3
0338-1
DRAFT
0338
FIELD LEVEL MAINTENANCE
PUMP HOUSE ACCESS DOOR(S) REPLACEMENT
INITIAL SETUP:
REMOVAL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wear safety goggles and use care when removing springs.
Springs are under
tension and can act as projectiles when released causing injury to personnel and
damage to equipment.
1.
Remove two springs (1) from hinge (2).
2.
With the aid of an assistant, remove five locknuts (3), screws (4), and lower door (5) from hinge (2).
Discard
locknuts.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
HWT2399
WARNING
ICON 26
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0398, Item 17)
Materials/Parts
Locknut (5)
Locknut (5)
Lockwasher (1)
Locknut (12)
Lockwasher (23)
Locknut (4)
Lockwasher (2)
Materials/Parts (continued)
Locknut (2)
Lockwasher (2)
Personnel Required
MOS 63B Wheeled Vehicle Mechanic (2)
References
WP 0391, Fig. 72
Equipment Conditions
Pneumatic springs removed (WP 0336)
Back to Top
