TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 421 of 1207
TM 9-2320-361-20
Section Il. STARTING SYSTEM MAINTENANCE
4-5. STARTING SYSTEM MAINTENANCE INDEX
PARA.
TITLE
PAGE
NO.
NO.
4-6.
Magnetic Starter Relay and Mounting
4-10
Bracket Replacement
4-7.
Starter Motor Replacement
4-12
4-8.
Starter Switch Replacement
4-14
4-6. MAGNETIC STARTER RELAY AND MOUNTING BRACKET REPLACEMENT
This task covers:
a. Removal
b.
Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-361-10
MATERIALS/PARTS
TM 9-2320-361-20P
Two locknuts
EQUIPMENT CONDITION
Six lockwashers
Ž Parking brake set (TM 9-2320-361-10).
●
Hood raised and secured (TM 9-2320-361-10).
●
Battery ground cable disconnected (para. 4-48).
●
Air cleaner assembly removed (para. 3-15).
NOTE
Tag leads for installation.
1. Remove nut (1), washer (2), and cable (3) from magnetic starter relay (19).
2. Remove nut (9), washer (8), and cables (7) and (6) from magnetic starter relay (19).
3. Remove nut (16), washer (17), and cable (18) from magnetic starter relay (19).
4. Remove two locknuts (4), lockwashers (5), screws (15), and magnetic starter relay (19) from
mounting bracket (10). Discard two locknuts (4) and lockwashers (5).
5.
Remove two screws (14), lockwashers (13) and (12), and mounting bracket (10) from engine
block (11). Discard lockwashers (13) and (12).
1. Install mounting bracket (10) on engine block (11) with two screws (14) and new lockwashers (13)
and (12).
2. Install magnetic starter relay (19) on mounting bracket (10) with two screws (15), new lock-
washers (5), and locknuts (4).
3. Install cable (3) on relay (19) with washer (2) and nut (1).
4. Install cables (6) and (7) on relay (19) with washer (8) and nut (9).
5. Install cable (18) on relay (19) with washer (17) and nut (16).
4-10
Back to Top
