TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 319 of 764

TM 9-2320-361-34

Section Il. DUMP BODY MAINTENANCE

I

15-2.

DUMP BODY MAINTENANCE INDEX

PARA.

TITLE

PAGE

NO.

NO.

15-3.

Control Lever and Lock Replacement

15-8

15-4.

Dump Body Maintenance

15-11

15-5.

Tailgate Control Linkage Maintenance

15-16

15-6.

Cab Protector Maintenance

15-20

I

15-3. CONTROL LEVER AND LOCK REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

M342A2

REFERENCES (TM)

LO 9-2320-209-12-1

TOOLS

TM 9-2320-361-10

TM 9-2320-361-20

General mechanic’s tool kit

TM 9-2320-361-34P

(Appendix B, Item 1)

EQUIPMENT CONDITION

MATERIALS/PARTS

●

Parking brake set (TM 9-2320-361-10).

Five locknuts (Appendix F, Item 89)

●

Driver’s seat removed (TM 9-2320-361-20).

Locknut (Appendix F, Item 106)

Woodruff key (Appendix F, Item 272)

Cotter pin (Appendix F, Item 6)

a. Removal

1.

Remove cotter pin (10), clevis pin (8), and linkage (9) from lever (15). Discard cotter pin (10).

2. Remove four locknuts (12) and screws (14) from two brackets (7) and floor (13). Discard lock-

nuts (12).

3.

Remove shaft (18), brackets (7), and boot (11) from floor (13).

4.

Remove locknut (17), screw (16), and lever (15) from shaft (18). Discard locknut (17).

5.

Remove woodruff

key (19) from

shaft (18).

Discard woodruff key (19).

6.

Remove two brackets (7) from shaft (18).

7.

Remove two lubrication fittings (6) from brackets

(7).

8. Remove locknut (5), washer (4), spring (3), and lock (1) from lever handle (2). Discard

locknut (5).

15- 8