TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 325 of 764

TM 9-2320-361-34

15-4.

DUMP BODY MAINTENANCE

(Contd)

1. Attach two chains to four corners of dump body (1) and attach lifting device to two chains.

2. Attach two guide lines to dump body (1).

WARNIN G

All personnel must stand clear during lifting operations. A swinging

or shifting load may cause injury or death to personnel.

NOTE

Two

assistants will help guide dump body during lifting operations.

3. Raise

dump body (1) and position on subframe (2).

4. Install two lubrication fittings (8) on pivot pins (7).

5. Install two hinge brackets (10) on two pivot pins (7) and dump body(1) with twelve screws (5) and

new locknuts (3).

6. Install two screws (4) and new locknuts (9) on two hinge brackets (10).

7. Install two thrust plate pins

(15)

in two roller arms

(16)

and thrust plates

(12).

8.

Install two lubrication fittings (17) on thrust plate pins (15).

9.

Remove

lifting

device,

two

chains,

and

guide

lines from dump body (1).

WARNIN G

Never work under dump body until safety braces are positioned

properly. Injury or death to personnel may occur if dump body

suddenly lowers.

10. Raise dump body (1) (TM 9-2320-361-10).

11. Raise two safety braces (11) to upright position.

12. Install two screws (14) and new locknuts (13) on two thrust plate pins (15).

13. Return

safety braces (11) to stowed position.

14. Lower dump body (1) (TM 9-2320-361-10).

15-14