TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 321 of 764

TM 9-2320-361-34

15-3. CONTROL LEVER AND LOCK REPLACEMENT (Contd)

b. Installation

1. Install lock (1), spring (3), washer (4), and new locknut (5) on lever handle (2).

2. Install

two

lubrication fittings (6) on brackets (7).

3. Install

two

brackets

(7) on shaft (18).

4. Install

new woodruff key (19) on shaft (18).

5. Install lever (15) on shaft (18) with new locknut (17) and screw (16).

6. Install lever (15), shaft (18), lever handle (2), boot (11), and two brackets (7) on floor (13) with four

new locknuts (12) and screws (14).

7. Install linkage (9) on lever (15) with clevis pin (8) and new cotter pin (10).

FOLLOW-ON TASKS:

●

Lubricate lever and lock (LO 9-2320-209-12-1).

. Install driver’s seat (TM 9-2320-361-20).

15-10