TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 317 of 764

TM9-2320-361-34

15-1.

CARGO BODIES MAINTENANCE (Contd)

5. Install trailer receptacle (3) behind cargo body (2) with four screws (1) and new locknuts (4).

NOTE

M35A2 front left side bracket mounting screws secure two sets of

springs positioned on top of body brackets. Right side spring sets

are the same and are secured below frame brackets.

6. Install four screws (21) in two brackets (5) and brackets (16). Install four springs (19) inside four

springs (20) and over four screws (21) with four washers (18) and new locknuts

(17).

7.

Adjust spring screws (21) to set springs (19) and (20) height to 6.375 in. (16.19 cm).

NOTE

M36A2 long wheelbase models have two additional body and frame

brackets. Perform step 8 for hardware installation.

8. Install four screws

(15)

in two brackets (7) and brackets (12) with four washers

(14)

and new lock-

nuts (13). Tighten locknuts

(13) 105-145

lb-ft (142-197 N.m).

9. Install six screws (8) to six brackets (6) and brackets (9) with six washers (11) and new

locknuts (10). Tighten locknuts (10) 125-165 lb-ft (170-224 N.m).

10.

Remove lifting device, chains, and guide lines from cargo body (2).

15-6