TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 379 of 764

TM 9-2320-361-34

I

15-17. VAN BODY SIDE PANEL REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M185A3 and M109A3

TM 9-2320-361-34P

TOOLS

EQUIPMENT CONDITION

General mechanic’s tool kit

Van body cabinet and work benches removed

(Appendix B, Item 1)

(para.

15-15).

PERSONNEL REQUIRED

Two

GENERAL SAFETY INSTRUCTIONS

Gloves,

eyeshields, and dust mask must be worn

during panel removal and installation.

WARNING

Gloves, eyeshields, and dust mask must be worn during panel

removal and installation. Failure to do so may result in injury to

personnel.

NOTE

All van body side panels are removed and installed basically the

same.

Remove twenty-four screws (3) and side panel (5) from van body wall

(l).

b. Installation

1. Place side panel (5) on van body wall (1) and aline panel screw holes (4) with screw holes

(2)

in frame.

2. Install side panel (5) with twenty-four screws (3).

15-68