TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 385 of 764

TM 9-2320-361-34

15-20. 115-VOLT RECEPTACLE REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL

SETUP

APPLICABLE MODELS

M185A3 and M109A3

EQUIPMENT CONDITION

. Parking brake set (TM 9-2320-361-10).

●

TOOLS

General mechanic’s tool kit

●

(Appendix B, Item 1)

Tool kit, electrical (Appendix B, Item 2)

REFERENCES (TM)

TM 9-2320-361-10

TM 9-2320-361-20

TM 9-2320-361-34P

Battery

-

ground cable disconnected

(TM 9-2320-361-20).

Safety switch in OFF position

(TM 9-2320-361-10).

a. Removal

NOTE

Tag wires, leads, terminals, and cables for installation.

1. Remove cap (1), clip (2), and cover (3) from base (5) on van wall (4).

2. Remove two screws (7) from receptacle (6) and retainers (8).

3. Pull receptacle (6) away from van wall (4).

4. Loosen three screws (10) and remove six wire

leads

(9) from receptacle (6).

5. Remove receptacle (6) from van wall (4).

6. Remove two retainers (8) from base (5).

1. Install two retainers (8) on base (5).

2. Install six wire leads (9) on receptacle (6) by tightening three screws (10).

3. Install receptacle (6) on two retainers (8) with two screws (7).

4. Install cover (3), clip (2), and cap (1) on base (5).

b. Installation

15-74