TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 637 of 764

TM 9-2320-361-34

16-18. POWER DIVIDER DRIVEBELT REPLACEMENT (M764)

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

M764

TOOLS

REFERENCES (TM)

TM 9-2320-361-10

TM 9-2320-361-34P

General mechanic’s tool kit

(Appendix B, Item 1)

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-361-10).

1. Loosen four screws (5) from idler bracket (3).

2. Loosen jamnut (2) and turn adjusting screw (1) out enough for removal of drivebelt (7).

3. Remove drivebelt (7) from worm gear sprocket (4), power divider sprocket (8), and idler wheel (6).

b. Installation

1. Install drivebelt (7) on worm gear sprocket (4), power divider sprocket (8), and idler wheel

2. Turn adjusting screw (1) until slack is removed from drivebelt (7) and tighten jamnut (2).

3. Tighten four screws (5) on idler bracket (3).

(6).

16-94