TM-9-2320-361-34
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
MAY 1992
TM-9-2320-361-34 - Page 627 of 764
TM 9-2320-361-34
16-16. POWER DIVIDER REPAlR(M764) (Contd)
b. Cleaning and Inspection
1. For general cleaning instructions, refer to para. 2-8.
2. For general inspection instructions, refer to para. 2-9.
3.
4.
5.
6.
Inspect two caps (1) and cap (2) for cracks, breaks, and wear. Refer to table 16-5, Power Divider
Wear Limits, for measurements. Replace caps (1) or (2) if damaged or worn past limits.
Inspect two washers (3) for cracks, bends, and thickness. Refer to table 16-5, Power Divider Wear
Limits, for measurements. Replace washers (3) if damaged or worn past limits.
Inspect two bushings (6) for cracks, breaks, and wear. Refer to table 16-5, Power Divider Wear
Limits, for measurements. Replace bushings (6) if damaged or worn past limits.
Inspect five spacers (4), (5), (7), (8), and (9) for cracks, brakes, and wear. Refer to table 16-5, Power
Divider Wear Limits, for measurements. Replace spacers (4), (5), (7), (8), or (9) if damaged or worn
7.
past limits.
Inspect bearing (10) (TM 9-214). Replace bearing (10) if worn or damaged.
Table 16-5. Power Divider Wear Limits.
ITEM
WEAR LIMITS/TOLERANCES
NO.
lTEM/POINT OF MEASUREMENT
INCHES
CENTIMETERS
1
Cap:
Inner diameter
2.999-3.001
7.617-7.623
Outer diameter
3.342-3.345
8.489-8.496
2
Cap:
Inner diameter
2.75
6.985
Outer diameter
3.328
8.453
3
Washer:
Thickness
0.120-0.125
0.305-0.318
Inner diameter
0.982-0.984
2.494-2.499
4
Spacer:
Inner diameter
0.751-0.753
1.908-1.913
Outer diameter
0.984-0.986
2.499-2.504
5
Spacer:
Inner diameter
1.50
3.81
Outer diameter
2.031
5.159
6
Bushing:
Inner diameter
1.796
4.562
Outer diameter
2.187
5.555
7
Spacer:
Inner diameter
1.000-1.015
2.54-2.578
Outer diameter
1.25
3.175
8
Spacer:
Inner diameter
1.796
4.562
Outer diameter
2.187
5.555
9
Spacer:
Inner diameter
1.775-1.785
4.509-4.534
Outer diameter
2.75
6.985
16-84
Back to Top
