TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 619 of 764

TM 9-2320-361-34

16-14. DUMP BODY SUBFRAME MAINTENANCE

(Contd)

c. Installation

NOTE

Perform steps 1 through 3 if installing new subframe.

1. Install hydraulic safety latch (para. 16-13).

2. Install hydraulic cylinders (para. 16-8).

3. Install

control valve (para. 16-10).

4. Attach two chains to subframe channels

(2).

5. Attach lifting device to center of two chains.

6. Attach two guide lines to front and rear of subframe (3).

WARNING

All personnel must stand clear during lifting operations. A swinging

or shifting load may cause injury or death to personnel.

NOTE

Assistant will help guide subframe during lifting operations.

7. Lift

subframe

(3) clear of wooden supports.

8. Lower subframe (3) on frame sill (10) and frame (6) with brackets (1) and (8) alined.

9. Install two subframe brackets (4) on frame (6) with six screws (7) and new locknuts (5).

10. Install two subframe brackets (1) to frame brackets (8) with four screws (9), four keepers (13), four

springs (14), keepers (13), washers (12), and new locknuts (11).

11. Remove lifting device from two chains. Remove two chains from subframe channels (2).

12. Remove two guide lines from front and rear of subframe (3).

16-76