TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 625 of 764

TM 9-2320-361-34

16-16.

POWER DIVIDER REPAIR (M764)

(Contd)

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

NOTE

●

Spring and detent

will come

out of

shifter

fork

when

shifter

rod

is

removed.

●

Scribe position of straight rod for assembly.

Remove nut (30), straight rod (3), shifter fork (1), spring (32), and detent

(31)

from housing (2).

Remove two cotter pins

(12)

and nuts

(13)

from idler shaft

(14).

Discard cotter pins

(12).

Remove idler shaft (14) and gear (21) from housing (2).

Remove two washers

(15),

spacer (20), bearing (19), spacers

(18)

and

(17),

and bearing

(16)

from

gear (21).

Remove four screws (24), lockwashers (23), and cap (22) from housing (2). Discard lockwashers (23).

NOTE

Measure thickness of shim(s) for assembly.

Remove four screws (10), lockwashers (11), cap (8), and shim(s) (7) from housing (2). Discard

lockwashers (11) and shim(s) (7).

Remove seal (9) from cap (8). Discard seal (9).

Remove cotter pin (25) and nut (26) from shoulder shaft (5). Discard cotter pin (25).

CAUTION

Excessive tapping may damage threads of shoulder shaft.

Tap shoulder shaft (5) and bearing (6) out of housing (2) and remove gears (28) and (29) from

housing (2).

Remove bearing (27) from housing (2).

Remove bearing (6) and woodruff key (4) from shoulder shaft (5). Discard woodruff key (4).

16-82