TM-9-2320-366-20-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-2 - Page 635 of 1632

TM 9-2320-366-20-2

CONTINUITY TEST

Change 1

2-1457

(1) Cut wire C from conductor splice at

pneumatic solenoid L19.

(2) Set multimeter to ohms.

(3) Connect positive (+) probe of multimeter

to terminal block TBC.

(4) Connect negative (-) probe of multimeter to

wire C and note reading on multimeter.

(5) If continuity is not present, replace M1089

winch control wiring harness (para 7-142).

(6) If continuity is present, replace 30K winch

pneumatic manifold solenoid L19

(para 17-29).

(7) Install circuit breaker CB50 in PDP.

(8) Install PDP cover (para 16-2).

(9) Install wrecker control panel top cover

(para 14-4).

(10) Close LH and RH catwalks.