TM-9-2320-366-20-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-2 - Page 644 of 1632
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
2-1466
2-1466
2-1466
2-1466
2-1466
NO
YES
KNOWN INFO
TEST OPTIONS
Circuit breaker CB50 OK.
Mode selector switch in
NORMAL position.
Hydraulic functions OK.
Station selector switch
in remote control position.
All functions from wrecker
control panel OK.
Actuator solenoids OK.
Wrecker remote control
box OK.
POSSIBLE PROBLEMS
Faulty remote control
wiring harness.
5.
Is continuity present
between TB and
connector J1 and/or J2?
Continuity Test or
STE/ICE-R Test #91
REASON FOR QUESTION
If continuity is not present,
wire is faulty.
Repair wire (para 2-45) or
replace M1089 remote control
wiring harness (para 7-117).
Perform Wrecker Pneumatic Troubleshooting
(aa1. One Wrecker Function Does Not Operate
From Wrecker Remote Control).
e141.
ONE WRECKER FUNCTION DOES NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT)
e141.
ONE WRECKER FUNCTION DOES NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT)
e141.
ONE WRECKER FUNCTION DOES NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT)
e141.
ONE WRECKER FUNCTION DOES NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT)
e141.
ONE WRECKER FUNCTION DOES NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT)
Back to Top
