1.
TEST OPTIONS
REASON FOR QUESTION
START
WARNING
CAUTION
Read WARNING and
CAUTION on
following page.
NO
Voltage Test or
STE/ICE-R Test #89
YES
This question eliminates
possible problems and
determines where
troubleshooting continues.
Is 24 VDC present at
connector L7 socket 1?
KNOWN INFO
POSSIBLE PROBLEMS
Faulty tailgate release
solenoid.
Faulty tailgate release
switch.
Faulty auxiliary panel cable
assembly.
Faulty dump power cable
assembly.
Faulty dump cable assembly.
Dump bed raises and lowers.
Pneumatics system OK.
Materials/Parts
Wire, Elec, 50ft (Item 71, Appendix D)
Personnel Required
(2)
References
TM 9-4910-571-12&P
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
STE/ICE-R (Item 41, Appendix C)
Multimeter, Digital (Item 22, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
e142. M1090/M1094 TAILGATE RELEASE DOES NOT OPERATE
Go to step 3 of this fault.
TM 9-2320-366-20-2
2-1468
Change 1